ROM Galaxy S4 I9500 – ROM Android 4.2.2
ROM Official Firmware Samsung Galaxy S4 I9500 Version: I9500XXUAMDE
Language support: Multi Lang
ROM Install :
1.Extract Firmware zip file that you downloaded already from above link, you will get a .tar.md5 file and a .dll file.
2.Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
3.Power off your phone. Wait 5-6 seconds for vibration to confirm complete switch off.
4.Now, put the Galaxy S4 I9500 phone in Download Mode by pressing and
holding down the Volume Down and Home (center) button simultaneously and
then long press the Power button till you see a screen that prompts you
to press the Volume Up key to continue.
5.Now run Odin3
v3.07.exe (see Step 2) as an Administrator because Admin privileges is
required to complete the process smoothly.
6.Now connect your
Galaxy Note GT-I9500 with your PC using USB cable. A message will arrive
under Odin’s message box in the bottom left saying “Added!!”. If you
don’t get the same then you should try another USB port (try USB port
located in back in your desktop PC). If that too don’t work then you
should then reinstall the driver. If you successfully see the “Added!!”
message in Odin then you are ready to go in next step. You should also
see COM port with a number in Yellow if you successfully added your
device.
7.Select these files in Odin at respective buttons from extracted I9500XXUAMDE firmware folder :
1.Click the PDA Button, and select the .tar file here with *code* appearing in its name
2.Click the Phone Button, and select file with *modem* in its name (leave it blank if there is no such file)
3.Click the CSC Button, and select file with *csc* in its name (leave it blank if there is no such file)
4.Click the PIT Button, and select the .pit file. Use only if you got it while extracting in step 1 above, otherwise ignore it.
8.In Odin window, make sure Auto Reboot and F. Reset Time checkboxes
are selected. Also, make sure that Re-Partition checkbox is selected,
only if you are using a .pit file (see Step 7.4).
9.Double check
everything that we mentioned in Step 7 & Step 8 above. Now, once
satisfied hit the START button to begin the flashing process.
10.Once flashing completed, your phone will restart and soon you will
see a PASS message with green background in the left-most box at the
very top of the Odin. You can now unplug the USB cable to disconnect
your device from computer.
link download
Tidak ada komentar:
Posting Komentar